|
Lightning Base Kit Components |
 |
|
Molded one piece fuselage |
Bulkheads already installed, pre marked for wing cut outs, seat back
bulkhead installed. No lay ups or epoxy work to do. |
|
Left & Right Horizontal Stabilizers |
Pre
molded and closed. Ready for elevator hinge attachment and
insertion into fuselage |
|
Left & Right Elevators |
Pre
molded and ready for hinge attachment and counter weight installation.
Elevator drive horn welded and ready for painting & installation |
|
Pre molded Rudder |
Ready
for hinge installation, rudder cable attachment bracket installation and
counter weight installation. |
|
Left & Right Wing |
Fuel
tanks & fittings installed. Ready for wing tip installation (epoxy
bond). Ready for aileron and flap hinge installation. |
|
Flaps |
Complete left & right flaps ready to bolt on to the wings after minor
trimming |
|
Ailerons |
Complete & closed. Ready for hinge installation and then
attachment to the wing with minor trimming |
|
Rudder Pedals & Control Sticks |
All
welding completed. Ready to assemble and bolt into aircraft after
painting |
|
Brakes & Wheels |
Matco
Hydraulic brakes with 5" x 5" wheels on mains. Matco 4.00 x 4 nose
wheel. Aircraft grade tires. |
|
Canopy |
Stretch formed canopy and molded fiberglass frame included with two gas
struts and positive latching mechanism. Ready to install after
minor trimming to fit canopy frame and fuselage. |
|
Stainless Firewall |
Sent
as raw stainless sheet stock. Must be cut to size with hand shears
and edges deburred. |
|
Cowls |
Top &
Bottom cowls pre molded and gel coated. Ready for final minor trim
after engine installation. |
|
Spinner |
Fiberglass spinner with carbon fiber back plate. Ready for
assembly and installation after cutout for prop. |
|
FWF Systems |
Included engine mount, carb heat system, oil cooling system, oil
recovery system for crankcase vent, battery box, fwf fuel system, aux
electric fuel pump, SCAT ducting & clamps. misc hardware. |
|
Center console / Arm Rest |
Pre
molded and ready to bond in place. Transitions into the instrument
panel |
|
Instrument Panel |
Blank
Panel std. Precut and labeled panel optional |
|
Baggage Compartment |
Foam
sandwich rear sound curtain and floor panels. |
|
Hardware |
All
AN hardware, aircraft grade stainless cables. No common low grade
bolts or fasteners. |
|
Lightning is also available as a series of sub
kits. Click on Sub Kits above |
